Pin Assignments

The Raspberry Pi Pico has an incredibly flexible I/O configuration and most built-in peripherals (except for the ADC) can be used on multiple sets of pins. Note, however, that not all peripherals can use all I/Os. Refer to the RP2040 datasheet or an online pinout diagram for more details.

Additional methods have been added to allow you to select a peripheral’s I/O pins before calling ::begin. This is especially helpful when using third party libraries: the library doesn’t need to be modified, only your own code in setup() is needed to adjust pinouts.

I2S

::setBCLK(pin)
::setDOUT(pin)

Serial1 (UART0), Serial2 (UART1)

::setRX(pin)
::setTX(pin)

SPI (SPI0), SPI1 (SPI1)

::setSCK(pin)
::setCS(pin)
::setRX(pin)
::setTX(pin)

Wire (I2C0), Wire1 (I2C1)

::setSDA(pin)
::setSCL(pin)

For example, because the SD library uses the SPI library, we can make it use a non-default pinout with a simple call

void setup() {
    SPI.setRX(4);
    SPI.setTX(7);
    SPI.setSCK(6);
    SPI.setCS(5);
    SD.begin(5);
}